The rod-end processing machine is our machine that allows the ends of our piston rods to be brought to the desired size and diameter. With this machine, you can reach the desired values by entering the depth and length values you want to create on the ends of the piston rods into the machine.

In rod-end processing machine, only one side of the piston rod can be processed or it can be adjusted to create the desired dimensions on both ends at the same time. Another feature of the machine is that there is a product feeding section, so there is no operator waiting in front of it. In this way, since your machine will operate automatically, you can reduce your labor costs.

The piston rod diameters to be processed should be specified before the machine is produced. In this way, our special heads that process the piston rod ends will be designed.

The cycle of the machine is 8-10 seconds on average,
A slight degree of off-center may occur.
There is PLC and touch screen control. Can controlled everything by the PLC display.
There will be an automatic feeding system, Loading/uploading options.
The machine can be operated as automatic and operator controlled.
Both sides of the rods are turned at the same time and the rod is brought to the desired length,
Coolant is used while operations are carried out on the machine,
Machine Color will be choosen by customer.

Our machine is can be used in too many different productions. But our machine is going to be perfect fir in the gas spring production line.

The machine can be designed to process the piston rod in the desired length. In addition, a memory option can be added to our machine. In this way, if you want to produce your piston rod again after a certain period of time, after entering the diameter and length information once, just typing the special code you provided will allow the machine to automatically adjust its dimensions.

You can check our other machines by checking our catalog.

For any question, please do not hasitate to contact with us!